*contributes to 40 credits available for asset energy rating
Aim
To minimise operational energy consumption and the associated carbon emissions by increasing the intrinsic energy efficiency of the building fabric and the installed buildings services
Question
- What percentage of fans are fitted with variable speed drives (VSD)?
- Are the pumps fitted with VSDs?
- What is the specific fan power for air handling systems?
- Has the ductwork been tested for leakage and appropriate remedial action taken?
- In what year was the main ventilation system replaced (if known)?
- What is the heat recovery rate of the ventilation system (if known)?
Credits | Question | For questions 1,3,5,6 enter value. For question 2 and 4 select either Yes or No | Units |
- | 1 | Enter value | % |
- | 2 | Yes/No | |
- | 3 | Enter value | W/l/s |
- | 4 | Yes/No | |
- | 5 | Enter year | |
- | 6 | Enter value | % |
Evidence
Criteria | Evidence requirement |
- | The evidence below is not exhaustive, please also refer to the ‘BREEAM evidential requirements’ section in the scope of the Guidance for appropriate evidence types which can be used to demonstrate compliance. |
All | Extract of relevant O&M manuals or a copy of manufacturer information for the ventilation system. |
All | Service/maintenance records for the ventilation system. |
All | Visual inspection of the equipment date (photographic evidence if possible). |
All | Copy of duct and air handling leakage test results. |
5 |
Copy of documentation outlining when the ventilation system was installed or replaced, such as,
|
Definitions
Air handling systems:
For the purposes of this issue, air handling systems are systems (usually centralised) which distribute air (usually for cooling) around the building.
Variable speed drive:
These are devices that can be attached to electrical motors to adjust the speed of a motor e.g., in a fan or a pump, when the service demand varies. These are also referred to as VFD (Variable frequency drive) and AFD (Adjustable frequency drive).
Additional information
Asset energy calculator
In order to obtain the maximum possible number of credits for the asset energy performance as much information as possible should be entered. Where no value is entered, the asset energy rating calculator will assume a pessimistic default value.
© Copyright Building Research Establishment Ltd 2021
Comments
0 comments
Please sign in to leave a comment.