Option 1. material ingredient reporting (1 point)
Use at least 20 different permanently installed products from at least five different manufacturers that use any of the following programs to demonstrate the chemical inventory of the product to at least 0.1% (1000 ppm).
- Manufacturer Inventory. The manufacturer has published complete content inventory for the product following these guidelines:
- A publicly available inventory of all ingredients identified by name and Chemical Abstract Service Registration Number (CASRN) and/or European Community Number (EC Number)
- Materials defined as trade secret or intellectual property may withhold the name and/or CASRN/EC Number but must disclose role, amount and hazard screen using either:
- GreenScreen benchmark, as defined in GreenScreen v1.2.
- The Globally Harmonized System of Classification and Labeling of Chemicals rev.6 (2015) (GHS)
- The hazard screen must be applied to each trade secret ingredient and the inventory lists the hazard category for each of the health hazards included in Part 3 of GHS (e.g. “GHS Category 2 Carcinogen”).
- Identify in the inventory all hazard classes for which a classification cannot be made because there are insufficient data for a particular endpoint(s).
- Health Product Declaration. The end use product has a published, complete Health Product Declaration with full disclosure of known hazards in compliance with the Health Product Declaration open Standard.
- Cradle to Cradle. The end use product has been certified at the Cradle to Cradle v2 Basic level or Cradle to Cradle v3 Bronze level.
- Declare. The Declare product label must indicate that all ingredients have been evaluated and disclosed down to 1000 ppm.
- ANSI/BIFMA e3 Furniture Sustainability Standard. The documentation from the assessor or scorecard from BIFMA must demonstrate the product earned at least 3 points under 18.104.22.168 Advanced Level in e3-2014 or 3 points under 22.214.171.124 Advanced Level in e3-2012.
- Cradle to Cradle Material Health Certificate. The product has been certified at the Bronze level or higher and at least 90% of materials are assessed by weight.
- Product Lens Certification
- Facts - NSF/ANSI 336: Sustainability Assessment for Commercial Furnishings Fabric at any certification level
- USGBC approved program. Other USGBC approved programs meeting the material ingredient reporting criteria.
Option 2. Material ingredient optimization (1 point)
Use products that document their material ingredient optimization using the paths below for at least 25%, by cost, of the total value of permanently installed products in the project.
- GreenScreen v1.2 Benchmark. Products that have fully inventoried chemical ingredients to 100 ppm that have no Benchmark 1 hazards:
- If any ingredients are assessed with the GreenScreen List Translator, value these products at 100% of cost.
- If all ingredients are have undergone a full GreenScreen Assessment, value these products at 150% of cost.
- Cradle to Cradle Certified. End use products are certified Cradle to Cradle. Products will be valued as follows:
- Cradle to Cradle v2 Gold: 100% of cost
- Cradle to Cradle v2 Platinum: 150% of cost
- Cradle to Cradle v3 Silver: 100% of cost
- Cradle to Cradle v3 Gold or Platinum: 150% of cost
- International Alternative Compliance Path – REACH Optimization. End use products and materials have fully inventoried chemical ingredients to 100 ppm and assess each substance against the Authorization list – Annex XIV, the Restriction list – Annex XVII and the SVHC candidate list, (the version in effect in June 2013 ), proving that no such substance is included in the product. If the product contains no ingredients listed on the REACH Authorization, Restriction, and Candidate list, value at 100% of cost.
- USGBC approved program. Products that comply with USGBC approved building product optimization criteria.
Option 3. Product Manufacturer Supply Chain Optimization (1 point)
Use building products for at least 25%, by cost, of the total value of permanently installed products in the project that:
- Are sourced from product manufacturers who engage in validated and robust safety, health, hazard, and risk programs which at a minimum document at least 99% (by weight) of the ingredients used to make the building product or building material, and
- Are sourced from product manufacturers with independent third party verification of their supply chain that at a minimum verifies:
- Processes are in place to communicate and transparently prioritize chemical ingredients along the supply chain according to available hazard, exposure and use information to identify those that require more detailed evaluation
- Processes are in place to identify, document, and communicate information on health, safety and environmental characteristics of chemical ingredients
- Processes are in place to implement measures to manage the health, safety and environmental hazard and risk of chemical ingredients
- Processes are in place to optimize health, safety and environmental impacts when designing and improving chemical ingredients
- Processes are in place to communicate, receive and evaluate chemical ingredient safety and stewardship information along the supply chain
- Safety and stewardship information about the chemical ingredients is publicly available from all points along the supply chain
Products meeting Option 3 criteria are valued at 100% of their cost for the purposes of credit achievement calculation.
For credit achievement calculation of options 2 and 3, products sourced (extracted, manufactured, purchased) within 100 miles (160 km) of the project site are valued at 200% of their base contributing cost. For credit achievement calculation, the value of individual products compliant with either option 2 or 3 can be combined to reach the 25% threshold but products compliant with both option 2 and 3 may only be counted once.
Structure and enclosure materials may not constitute more than 30% of the value of compliant building products. Projects with significant amounts of structural and enclosure materials may exceed the 30% limit by calculating an alternative structure and enclosure limit (See Calculations under Further Explanation).Meet the requirements of the credit above and include furniture and furnishings within the project’s scope of work.